draw a sunset with palm trees

Jump To Materials List

How To Paint A Palm Tree Sunset

This beginners acrylic painting tutorial will guide you through the steps on how to paint a palm tree sunset with a full pink, orange and blue sky.

In the foreground there are silhouettes of swaying palm trees with string lights and an umbrella with two beach chairs.

This one works as a couples painting!

Simply divide the painting design in half. Do this on two 11 x 14 Canvases positioned vertically (or two 8 x 10s). Have your partner do one side and you do the other!

Sunset For Two (Couples Design Variation)

Enjoy And Happy Painting!

Materials:

Active Time 2 hours

Total Time 2 hours

Difficulty Easy

Instructions

For more detailed instructions please scroll down through the entire tutorial below.
Paint the sunset starting from the top of the canvas and "cobalt blue". Continue down the canvas adding: "titanium white", "medium magenta" and "primary yellow".
Use a circle foam pouncer to paint the sun.
Paint the reflection under the sun using "primary yellow"
Paint the ocean with "cobalt blue" and a little bit of "titanium white" and other colors in the sunset.
Paint the silhouette of the land on the bottom of the canvas
Paint the silhouettes of the palm trees using a #4 bright brush and "mars black".
Paint the silhouettes of the umbrella and chairs
Paint the silhouettes of the birds.
Use the back of your paint brush to stamp "titanium white" dots to represent the string lights.

Color Palette:

Traceable:

This is a copy of the chair I drew for the chair silhouettes in this painting. Print it out on standard size computer paper.

Directions at a glance:

Video:

Step By Step Directions:

1. Get your supplies ready!

You'll need a 3/4″ flat brush, cobalt blue, titanium white, medium magenta and primary yellow. You'll also need a cup of water!

2. Paint cobalt blue at the top of the sky

Using your 3/4″ flat brush and colbalt blue, start at the top. Paint long solid left and right strokes across the canvas. (Tip: dip your brush in the water first and slightly wipe it dry to allow the paint to flow)

Continue to paint left and right strokes but as you work your way down, leave a lot of open areas.

3. Add titanium white into the sky

Don't rinse the cobalt off your brush.Load it into titanium white.

Paint left and right strokes with that titanium white but not all the way across the canvas. Fill in the blank areas. That white will blend with the blue. Leave some more open areas as you work your way down.

4. Define your horizon line

Before you go any further, you'll need to define your horizon line so you know where the water will start. Use a t-square ruler and a pencil. Draw the line about five fingers from the bottom of the canvas.

5. Add magenta into the sky

Next rinse your brush off of all the blue and white.Then load the brush with medium magenta and titanium white (about equal amounts). Paint left and right strokes filling in the blank areas and overlapping some of the other areas.

Add this medium magenta/ titanium white combo all throughout the sky. Blend it with the blue by painting over the blue. Apply different amounts of medium magenta in some areas and different amounts of titanium white in other areas. Go almost all the way to the horizon line.

Add more white closer to the horizon line because this area is brighter. Then add mostly white along the horizon line. You can also add a few more strokes of white higher in the sky.

6. Add yellow into the sky

Next load your 3/4″ flat brush in the yellow and add it into the sky in the area closest to the horizon line. It should blend with the titanium white that is already in that area. To get the orange tones in the sky, blend the medium magenta with the yellow and those two colors will turn orange.

Tip: if your yellow is too strong, add more titanium white to it.

Keep painting left and right strokes with this yellow mostly in the bottom area of the sky. Then paint some thinner strokes in the medium magenta area. (To do the thinner strokes, use the tip of your brush instead of the full width.)

7. Paint the sun

For the sun I used the large pouncer in this set. I used my finger to apply titanium white to the sponge.

Stamp your sun half way above the horizon line offset to the right of the painting.

If you want your sun to be yellow, then add the primary yellow to the sponge and stamp it on the circle again.(Note: in one painting I did a yellow sun. In another painting of this design I ended up doing the sun white. It kind of depends if there's enough orange tones around the sun for the yellow to stand out)

8. Paint the yellow reflection under the sun

Use a 3/4″ flat brush and primary yellow. Paint short horizontal strokes in a rectangular shape under the sun going all the way to the bottom of the canvas.

9. Paint the water

Rinse all the yellow off your brush. Load your 3/4″ flat brush in cobalt blue and a bit of titanium white. Fill in the entire ocean area with these two paint colors. Be sure to do long horizontal strokes.

Go almost all the way to the bottom of the canvas but leave a small area blank on the bottom. Do not paint over the yellow reflection area.

Don't rinse the blue off your brush. Add some more white on your brush and paint horizontal water lines everywhere. Then lightly paint over the yellow reflection area with the blue/white that is on your brush. This gives some water texture in the yellow reflection area.

Optional: add a tiny bit of medium magenta (rinsed brush) on your brush and gently paint some medium magenta water lines. Do the same with the yellow. These lines are very light and feathery, almost a dry brush stroke.

10. Paint the land silhouette

Use your 3/4″ flat brush and mars black to paint a line starting on the left of the canvas. Paint a long wavy line that starts out high but then dips down. There is on open space on the far right.

Then paint the entire land area solid black. Also, fill any blank white areas in the water cobalt blue (specifically on the bottom right).

11. Paint the palm trees

Use a #4 bright brush for this step. Start by painting the trunks of the trees. Palm tree trunks are thicker on the bottom and get thinner at the top. To achieve this effect, use the full width of the brush on the bottom. Then when you paint up, twist your brush on its side to achieve the thinner line.

I did three palm trees on the left and two on the right. There is a shorter palm tree on the far left. Also the two middle palm trees are curving opposite from each other.

Next paint the middle spine part of the palm leaves. To do this, use your #4 flat brush and the very tip of it to paint think lines. Paint 5-6 lines radiating from the top of the trunk. Some are hanging down, some are swaying upwards, etc.

To paint the leaflets, use your #4 flat brush but use the full width of the brush. Start at the spine and drag the brush down forming the leaflets. (Tip keep the paint on the brush kind of dry to get the stroke to be "whispy" or "feathery")

Use the full width of the #4 brush for all the spines and keep dragging each chunk of leaflet from the spine out. On some of the leaves I did this on both sides of the spine and on others I did it only on one side.

Looking back at this painting, I actually really like it with just the palm trees. Nice and simple! In the next steps I will show you how I did the umbrella & chair details.

12. Paint the umbrella.

To do the umbrella, use a piece of chalk to draw a triangle. The bottom of this triangle pretty much lines up with the horizon line. The top point is about 3″ high. (Note I'll be doing a traceable for this!)

Then paint the triangle with mars black and paint a center line in the middle.

I used my #4 round brush for this step. Use the tip of your brush to add some texture on the umbrella edges. Also paint a small horizontal line to represent an attached little drink table.

13. Paint the birds and little wine glasses

Use a 10/0 liner brush and mars black to paint the birds.

Then use the 10/0 liner to paint the little wine glasses on the umbrella table.

To do the highlights, rinse the black off the brush and add white on the left sides of the wine glass shape.

14. Paint the chairs

I had some MAJOR issues with these chairs! :p They look simple but I messed up quite a few times trying to free hand this silhouette with the paint brush. I found it easiest to draw the chair on a sketch paper first and then transfer it with graphite paper. I'll get this traceable up for you soon!